Elcometers

Elcometer

456 Integral Coating Thickness Gaug

Part Number      : A456FBI1 Description        : Basic Ferrous Integral Scale 1 Metric                : 0 – 100 μm Imperial             : 0-60 mills

Elcometer 128 Pictorial Surface Standart

Surface Standards include: BS EN ISO 8501-1:2007/SIS 055900 BS EN ISO 8501-4:2006 The SSPC Standard - VIS 1 The SSPC Standard - VIS 2 The SSPC Standard - VIS 3  The SSPC Standard - VIS 4 The SSPC Standard - VIS 5

Elcometer 112 & 3236 Hexagonal Wet Film Comb

Formed iAn stainless steel Sturdy and long lasting Precise and reuseable Measure up to 2000 µm (80mils)

 Precision Foil Sets

Metric and Imperial values displayed on each foil Available individually certified and individually un-certified, or in foil sets Each foil has unique serial number for traceability  Available in thicknesses from 12.5µm to 25mm (0.5 to 980mils) Precision foils have a ±1% accuracy.  Foils below 50µm (2.0mils) have an accuracy of ±0.5µm (0.02mil).

 

  Elcometers 270 Pinhole detectors Inspector's kit

Model               Part Number   Packing List

Inspectors Kit T27018191 Separate wand handle & lead, roller wand, 10m (33’ signal return cable, 2 x extension pieces, telescopic extension, belt clip, bottle of wetting agent, 3 x AA batteries, spare flat sponge, spare roller sponge

Elcometer 114 Dewpoint Calculator

The range of the Elcometer 114 is -10°C to 50°C (14°F to 122°F) and it has an accuracy of ±1% of standard tables. The calculator includes a °C to °F converter.

 Elcometer 116 Whirling & Sling Hygrometers

Measuring Range Dimensions Weight Packing list

-5°C to 50°C (23°F to 122°F) 17 x 22mm (6.9 x 10”) 300g (0.6lb) Elcometer 116 Whirling Hygrometer or Elcometer 116 Sling Hygrometer, slide rule table and operating instructions

Elcometers 122 Testex Replica Tape

Profile Range   : 38 - 115µm (1.5 - 4.5mils) Test area          : 19 x 54mm (0.75 x 2.13”)                             Pack of 50 in each rol

Elcometer 127
Keane-Tator Surface Comparators & Magnifiers

The Elcometer 127 range of Surface Comparators are available in sand, shot or grit surface profiles. Each comparator is supplied with 5 profile grades ranging from 0.5 - 5.5mils. Designed for use with the Elcometer 127 illuminated magnifier, each comparator has a hole in the centre allowing for clear visual comparisons to be made.

Elcometers 124 Testex Thickness Gauge

Range Dimension Weight Scale Resolution

: 5mm : 125 x 95 x 25mm : 270g : 2µm

Hypodemic Needle Pressure Gauge

Pocket sized pressure gauge adapted for  use with hypodermic needle to determine blasting air pressure at the nozzle. Instant readings from 0 - 210 psi

Mini Test 650

Measuring Range Measuring Uncertainty Minimum Curvature Radius Minimum Measuring Area Minimum Base Thickness Display Measuring Units Calibration Statistics  Interface Power Supply Dimensions and Weight    Housing      Sensor Ambient Temperature    Gage    Sensor

: Model F (steel) 0 - 3000μm / 120 mils : ±(2% of reading + 2 μm)   ±(2% of reading + 0.08 mils) : 5 mm / 0.2” convex 25 mm / 1”   concave  : Ø20 mm / 0.8” : 0.5 mm / 20 mils (F) 50 μm / 2 mils (N) : 4-digit screen date (11 mm / 0.44”) : μm - mils user selectable :Standard, 1-point and 2-point calibration : Calculated from maximum 9.999  readings, mean value, standard deviation, number    of readings, minimum and maximum : USB : 3 Micro AAA : : 2.7 x 4.8 x 1.25 inches / 70 x 122 x 32   mm : Ø 15mm x 62mm / Ø 0.60” x 2.44”;   225   grams / 7.93 ozs : : 0 to 50°C / 32° to 122°F : -10° to 70°C / 14° to 158°F

Surfatest (Wet film Comb)

Elcometers 124Thickness gauge