Blasting Equipment

1. Standart Blasting Hose (Yellow Stripe)

I.D 12mm(½") 25mm(1") 32mm(1¼") 39mm (1½")

O.D 27mm 39mm 48mm 56mm

Length 20m/40m 20m/40m 20m/40m 20m/40m

                                                                   
Safety Working Pressure= 150 psi Safety Factor = 3      

 2. Premium Blasting Hose (Red Stipe)

I.D 25mm(1") 32mm(1¼")

O.D 39mm 48mm

Length 20m/40m 20m/40m

                                                                          Safety Working Pressure= 150 psi Safety Factor = 3

3. Blast Host Coupling

  

I.D 27mm  39mm  48mm  56mm  O.D 12mm(½") 25mm(1") 32mm(1¼") 39mm (1½")            Material -Aluminium or Brass -Ductile Steel,Brass or Nylon

                                                                       *For Blast Hose Outside Diameter

4. Coupling Gasket

I.D 19mm (¾") 32mm(1¼") 32mm

Application For Air Hose 2-Claws Coupling For Blast Hose & Thread Coupling) (Ductile Steel or Brass or Aluminium) For Nylon Blast Hose Coupling only  Thread Couplings       -½ " BSP    Aluminium or Brass   -1¼ " BSP    Ductile Steel,Brass or Nylon

  

5. Nozzle Holders                               

 

BlastNozzle Holder is made of either Nylon or Aluminium. They are availableeither in Fine Thread (1¼"-NPS) or Wide Thread (50mm).

I.D 27mm  39mm 48mm 56mm              Thread Size ¾" NPS 50mm or (1¼-NPS) 50mm or (1¼-NPS) 50mm or (1¼-NPS) Material Aluminium,Nylon Aluminium,Nylon Aluminium,Nylon Aluminium,Nylon  6. Nozzle-Holder Gaskets I.D ¾" NPS Thread 1¼" NPS Thread 50mm Thread              Dimensions 24x12x3mm 38x25x5mm 43x39x9mm  7. Blast Nozzles We  offer a full range or Tungsten Carbide Venturi Blast Nozzle.  They come with either Wide Thread (50mm) or Fine Thread (1¼" NPSM). Choice of Metal or Polyurethane Jacket Size ¼" (6.5mm) 5/16" (8mm) 3/8” (9.5mm) 7/6"(11mm) ½ " (12.5mm) Fine Thread (1¼"-NPS)  √ √ √ √ √ Wide Thread         (50mm) √ √ √ √ 8. Blast Hose Whip Check   Recommended fot hose from 1” to 2” 9. Basic Abrasive Pot   Capacity  600 lbs

Thread Size ¾" NPS 50mm or (1¼-NPS) 50mm or (1¼-NPS) 50mm or (1¼-NPS)

Material Aluminium,Nylon Aluminium,Nylon Aluminium,Nylon Aluminium,Nylon

10. Tublast/Hollow-Blast

Blast Internal pipe from 60 mm to 300 mm Required 350 cft @ 100 psi compressed air

11. Abrasive

Garnet Size : 16-25 mesh, Propostional: 3.9 Denisty : 1,9 ton/m3 Hardness; 7,5 – 8.0 Package : 25 Kg/bag

PS Ball Size : 20-40 mesh, Proporsition : 3.9 Denisty : 7,8 g/cm3 Hardness; >6 Package : 25 kg/bag Steel Grit Size : 16-25 mesh, Proporsition : 3.9 Denisty : 7,4 g/cm3 Hardnes; 42-66 Package : 25kg/bag

Brown Alumunium Oxide

Size : 16-25 mesh, Proporsition : 3.9

Denisty : 1,6-1,9 g/cm3 Hardness;

Package : 25 kb/bag